Although welding robots are highly efficient and bring great benefits to enterprises, workers should pay attention to preventive measures during use to avoid danger. Next, I will introduce you to the points that need to be paid attention to when using robots.
1. Ensure the cleanliness of the work area and equipment. If there is oil, water, tools, workpieces, etc. on the ground, it must be removed in time to avoid hidden dangers to the operators. The neglect of this little detail may cause serious accidents. .
2. After using the tool, be sure to put it back to the original position outside the welding robot's motion range to avoid collision between the robot and the tool left on the fixture, causing damage to the fixture or robot, and economic loss. If all operations are completed, don't forget to clean the robot and fixtures. Don't ignore the problems in this area. After all, once a problem occurs, the loss is irreparable.
3. As the user of the robot, you must wear specific work clothes and corresponding protective caps before working to protect your body from injury.
4. The personnel responsible for the integration of welding robot systems, the design and manufacture of system equipment, must fully understand and master the related content of the guardrail and equipment. It is necessary to read the manual thoroughly to understand the correct operations and measures to be taken in case of an emergency, so as to avoid later I don't know how to solve the problem when it comes up.
5. Please strictly abide by the rules to avoid unexpected accidents or injuries. The personnel responsible for robot maintenance and inspection must check and confirm all circuits related to emergency stop, and make them correctly interlocked in accordance with the corresponding standards.
6. When performing maintenance or inspection operations, make sure that the emergency stop switch can be pressed at any time so that the robot can be stopped immediately before an accident occurs.
Before and after using the welding robot, you must carefully check it and ensure that the surrounding environment can satisfy the work without hindrance. You must not neglect the handling of details. Sometimes accidents happen because of improper handling of details.