Robotic Aluminum Welding

1. Product Description

Because the aluminum welding is not a easy job, we use the highest level welding power source from Aotai. The welding power has double pulse function and we have professional welding parameter to help customer to get better welding result. If you think the Aotai power source is not good enough, we can provide Lorch welding power source, this power source is suitable for thinner aluminum plate.

2. Welding Samples

3. Product Application

4. Technical Parameters

5. Product Certification

6. Aluminum Introduction

Aluminum alloys (or aluminum alloys; see spelling differences) are alloys in which Aluminum (Al) is the predominant metal. The typical alloying elements are copper, magnesium, manganese, silicon, tin and zinc. There are two principal classifications, namely casting alloys and wrought alloys, both of which are further subdivided into the categories heat-treatable and non-heat-treatable. About 85% of Aluminum is used for wrought products, for example rolled plate, foils and extrusions. Cast Aluminum alloys yield cost-effective products due to the low melting point, although they generally have lower tensile strengths than wrought alloys. The most important cast aluminum alloy system is Al–Si, where the high levels of silicon (4.0–13%) contribute to give good casting characteristics. Aluminum alloys are widely used in engineering structures and components where light weight or corrosion resistance is required.

Alloys composed mostly of Aluminum have been very important in aerospace manufacturing since the introduction of metal-skinned aircraft. Aluminum-magnesium alloys are both lighter than other Aluminum alloys and much less flammable than other alloys that contain a very high percentage of magnesium.

Aluminum alloy surfaces will develop a white, protective layer of Aluminum oxide if left unprotected by anodizing and/or correct painting procedures. In a wet environment, galvanic corrosion can occur when an Aluminum alloy is placed in electrical contact with other metals with more positive corrosion potentials than Aluminum, and an electrolyte is present that allows ion exchange. Referred to as dissimilar-metal corrosion, this process can occur as exfoliation or as intergranular corrosion. Aluminum alloys can be improperly heat treated. This causes internal element separation, and the metal then corrodes from the inside out.

Aluminum alloy compositions are registered with The Aluminum Association. Many organizations publish more specific standards for the manufacture of Aluminum alloy, including the Society of Automotive Engineers standards organization, specifically its aerospace standards subgroups, and ASTM International.

7. Delivery

Our standard product delivery time is 10 days.

We can provide EXW, FOB and CIF delivery terms.

We have our own carrier company can provide you very safe, fast, cheap delivery service.

8. After-sales Service

We have 82 professional engineers can provide 24 hours online technical support.

After sales service is the most advantage of Fulzh company. We have the most professional team and our target is solve all the problem of customers.

9. FAQ

Q: Can I buy your robot from our partner company in China?

Answer: Yes, but the price maybe different.

Q: Do you have CE certificate for power source?

Answer: Yes, we have CE for robot, welding power source and welding torch.

Q: What’s the accuracy of your robot?

Answer: 0.05mm.

Q: How many years have your company produced RV reducer?

Answer: We began to produce RV reducer from 2018.

Q: How many kinds of positioner do you have?

Answer: Now we have 10 kind of standard positioner, and we can design special positioner also.

Hot Tags: robotic aluminum welding, China robotic aluminum welding suppliers, manufacturers, factory, Aluminum Welding Robot, CE Industrial MIG Welding Robot, welding robotic, pluse robot, robot industrial, 6 Axis Welding Robot